Page History
...
| Material | Operation | Einstellung | Speed | Power | Min Power | Durchgänge | Kerf Offset | Bemerkung | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDF 5mm | Fläche Fräsen 2mm tief | Fill+Line | 400 | 25 | 10 | 9 | 0 | Line gleiche Einstellungen wie Fill Bei vertikalen Strukturen Fill-Rotation auf 90° setzen | MDF 5mm | Schneiden Exakt | Line | 75 | 30 | 30 | 12 | 0.1 | Web | MDF 3mm | Fläche Fräsen 1mm tief | Fill+Line | 375 | 30 | 20 | 3 | 0 | Line gleiche Einstellung wie Fill |
| Schiefer | Gravur | Fill | 200 | 20-60 | 1 | 0 | Beste Details bei bester Geschw. mit ~370 Lines/inch erreicht | |||||||||||||||||||
| PETG 0.5mm | Schneiden | Line | 35 | 50 | 50 | 1 | +0.1 | Handelsname z.B. Vivak | ||||||||||||||||||
| PETG 0.8mm | Schneiden | Line | 30 | 50 | 50 | 1 | +0.1 | Handelsname z.B. Vivak | ||||||||||||||||||
| Sperrholz 4mm | Schneiden | Line | 12-15 | 50 | 50 | 1 | Pappel allgemein am Besten zu verarbeiten. | |||||||||||||||||||
| Glas | Gravur | Fill | 100 | 20 | 20 | 1 | 0 | Glas | ||||||||||||||||||
| Alu (schwarz) | Gravur | Fill | 200 | 30 | 30 | 1 | 0 | z.b. Festplattengehäuse aus schwarzem Alu | ||||||||||||||||||
| Laserply (grau) | Gravur | Fill (0.03mm) | 200 | 8 | 8 | 1 | 0 | Ohne Schutzfolie gravieren. https://clevere-geschenke.de liefer an privat | ||||||||||||||||||
| Laserply 0.8mm | Schneiden | Line | 35 | 50 | 50 | 1 | 0 | |||||||||||||||||||
| EVA 2mm | Schneiden | Line | 150 | 25 | 25 | 1 | 0.15 | |||||||||||||||||||
| EVA 5mm | Schneiden | Line | 30 | 50 | 50 | 1 | 0.25 | |||||||||||||||||||
| EVA 10mm | Schneiden | Line | 15 | 50 | 50 | 2 | 0.5 | Fokusabstand -5mm | ||||||||||||||||||
| EVA | Gravur | Fill | 200 | 5-8 | 1 |